Build pipe fence braces without the welder!

As seen in

As seen in

           As seen in

           As seen in

Quotes From the Springfield Mo. and Tulsa Farm Shows:

Pretty darn slick!


Good product.

Where was this when I was building my fence?

Open customer recommendations about Fence Bullet

Until now, there was not an easy way to build pipe fence braces. Until now, welding was the only option. Welded braces are labor intensive, require special skills and expensive equipment causing welding to be costly in terms of both time and money.

Fence Bullet is a newly developed no weld solution to building pipe fence braces and rails. The patent pending no weld pipe connector offers many advantages over welding.

Advantages of Fence Bullet connectors:

  • Save Time - It only takes about 5 minutes to install a brace. Install and start stretching fence now!

  • Save Money - When compared with welding , Fence Bullets are  over 1/4 less expensive* and offer numerous other advantages.*(Based on a $40/hr welding rate, time charges of 3/4 hr/brace, and the cost of Fence Bullet connectors at $20.00/pair)

  • No Special Skills or Tools Required - Do it yourself. Cut the brace pipe to length. Fence Bullets install using only a 9/16 and 7/16 inch end-wrench.

  • Hired Welder Issues - Hiring problems, scheduling delays, liability and quality issues are all possibilities with a contractor.

  • No Fire Escape - No fear of fire escape or fire damages and liability.

  • No Delays - Delays caused by burn bans or field conditions that do not allow a welder to be used.  If you are waiting on a welder for any reason your fence construction is delayed.

  • Portable - Installs in the most remote areas where you could never get a welder.

  • Reusable - If your fencing needs to be changed, remove the Fence Bullets and reuse them at a new location.